Rise of the Tomb Raider Atlas Tutorial

Reference: What you will need: – A sheet of foamboard – Silver/Grey spray paint – Hot glue gun and glue sticks – Light http://ebay.to/2bJMJbE – Blade – small gems http://ebay.to/2bRULNZ – one bigger red gem http://ebay.to/2bEchcm Templates: Templates print on 3 A4 pieces of paper. Mini Atlas if you want it:

Read More

Rise Of the Tomb Raider Recurve Bow Tutorial

Mr Bill Doran from Punished Props was hired by Crystal Dynamics to make the Rise of the Tomb Raider bow and in this video he explains how he made a perfect replica. We contacted him and he gave us permission to post his video here, so Enjoy! Bow Info: Byzantine Recurve, made from field maple, etched symbols at the ends and has geometric patterns painted in gold. Reference:  (click to enlarge)

Read More

Rise Of the Tomb Raider Arrows Tutorial

Reference:  What you need:  Begin by covering the fletchings with masking tape so you don’t get any paint on them. If your arrows are already brown , you may skip this step. Paint the arrow completely brown. Next paint the fletching black and white and the nock a dark gray. For the arrow that you use with the bow, cut a piece of worbla (2 x 2 inches) , heat it up and wrap it around the end. While the worbla is still hot, cut it into two in the…

Read More

Rise of the Tomb Raider Jacket Weathering Tutorial

Reference:  The jacket is men’s military hooded, silver snap closure, 2 pockets, canvas material, olive drab color, oversized, rolled up sleeves, asymmetrical hem, leather bindings around the left arm and the right wrist. What you need:  – A Jacket that is as close to the above description as possible. – Brown leather bindings – Paint for weathering – Thread and needle in the same color of your jacket 1. I took a piece of scrap leather and tied it around the right wrist, then glued it down so it does…

Read More

Rise Of The Tomb Raider Nagant Revolver Tutorial

If you are like me and can’t spend $100-150 dollars on an airsoft copy of this pistol. I offer you an alternative. Not only is it expensive but the M1895 model is very different from Lara’s gun. For one, the weapon pictured in the reference photos is a top break revolver which means the frame is hinged at the bottom front of the cylinder. Releasing the lock and pushing the barrel down exposes the rear face of the cylinder. The Nagant M1895 is a swing out cylinder which means that…

Read More

Rise of the Tomb Raider Holster Tutorial by Jenn Croft

Rise of the Tomb Raider Holster Foam Version Rise of the Tomb Raider Holster Leather Version This holster was a fun project to work on, since it required me to try some new techniques in leather crafting that I haven’t used before. A little bit about the design… thanks to a friend’s help I was able to identify the design as reminiscent of the old hollywood style western drop holster, which includes a holster that attaches to the belt (or backing) via a flap at the top of the holster…

Read More

Rise of the Tomb Raider Quiver tutorial by Jenn Croft

Rise of the Tomb Raider Quiver by Jenn Croft The Rise of the Tomb Raider quiver was a fun project and relatively cheap to make. I worked on this as a collaborative effort with Meagan Marie (all photos courtesy of her). All of the materials came from Tandy Leather and cost around $100USD to make TWO quivers, one for Meagan and one for me.  (~$50USD per quiver) Here are my list of supplies, many of which included enough for two quivers, such as the leather, thread, straps, and belt: Rawhide-…

Read More

Rise of the Tomb Raider Rifle Ammo Pouch Tutorial by Jenn Croft

Rise of the Tomb Raider Rifle Ammo Pouch This was a fun little project to do and didn’t take a whole lot of money to make since I had leather from other projects. Here is what I used: 15″x15″ piece of untanned medium/thick leather hide 1 small strip of medium/thick leather hide for the closure tab on the lid two strips and one tiny strip of brown garment quality leather (from remnants) Button Stud- $3.50ea http://www.tandyleather.com/en-usd/search/searchresults/11310-02.aspx Waxed Polyester Thread- $5 http://www.tandyleather.com/en-usd/home/department/lacing/1206-02.aspx Dye (Dark Mahogany and Dark Brown)- $13 http://www.tandyleather.com/en-usd/home/department/leather-dye/2600-08.aspx http://www.tandyleather.com/en-usd/home/department/leather-dye/2602-02.aspx…

Read More

Rise of the TR Shotgun Ammo Pouch Tutorial by Jenn Croft

Rise of the Tomb Raider Shotgun Ammo Pouch by Jenn Croft This was a fun little project that didn’t take a whole lot of time. It also doesn’t cost much money and can be made from leftover materials from your other projects (Such as the rifle ammo pouch or holster) or remnant bags, which are pretty affordable. Here is a list of materials I used for mine: Upholstery leather from remnants (Any neutral color)- $6 http://www.tandyleather.com/en-usd/home/department/leather/remnant-bags/5046-03.aspx Small scrap of 2-3mm thickness leather- $6 http://www.tandyleather.com/en-usd/home/department/leather/remnant-bags/5046-01.aspx Cording- $6.99 http://www.michaels.com/bead-landing-jute-cord/M10443674.html?dwvar_M10443674_color=Natural#q=cord&start=38 Wood Beads- $3.50…

Read More

Tomb Raider Jade Pendant Necklace Tutorial

What you will need: FIMO modelling clay (any colour – we’ll paint it later!) Cutting Board Craft Knife Rolling Pin (cover with clingfilm so you don’t stain it) Brown Cord Small circular objects as guides (e.g. keyrings, bottle caps) Jewellery ‘Endings’ Lobster Clasp Jewellery Pliers To begin with, I cut one quarter of a standard sized block of FIMO. I bought ’emerald green’ as they had it in stock but it wasn’t necessary as I fully covered it in paint in the end, so you could just get white. I…

Read More